Title 201 | Chapter 018 | Regulation 072REG


PROPOSED
This document is not yet current.
View Current Regulation
PREVIOUS VERSION
The previous document that this document is based upon is available.
View Previous Version
BOARDS AND COMMISSIONS
Board of Licensure for Professional Engineers and Land Surveyors
(Amended at ARRS Committee)

201 KAR 18:072.Experience.

Section 1.

Evaluation of Experience in Engineering Required under KRS 322.040. The board, in reviewing an application for licensure as a professional engineer pursuant to 201 KAR 18:020, shall consider the following:

(1)

Experience shall reflect increasing complexity of the engineering tasks and the progressive responsibility of the applicant.

(2)

The applicant shall demonstrate knowledge of engineering mathematics, physical and applied sciences, properties of materials, the fundamental principles of engineering design, and the application of engineering principles in the solution of engineering problems.

(3)

One (1) year of credit may be approved for Completion of a master's degree in an engineering in an EAC/ABET-accredited program accredited at the undergraduate level by the Engineering Accreditation Commission of the Accreditation Board of Engineering and Technology, or an equivalent engineering program, oneshall be accepted as one (1) year of qualifying experience deemed equivalent by the board.

(4)

Experience gained in violation ofthat violates KRS Chapter 322 shall not be accepted as qualifying experienceapproved.

(5)

Engineering experience gained duringin the Military experience gained while on active duty in the Armed Forces of the United States shall be accepted as qualifying experience if it meets the definition for "engineering," as defined by KRS 322.010(4)serviceservices in the Armed forces of the United States may be approved.

(6)

Sales experience shall be accepted as qualifying experience if the professional service or work requires the application of engineering principles that meet the definition for "engineering," as defined by KRS 322.010(4)may be approved if engineering principles were required and used in that experience.

(7)

Experience gained in Teaching advanced-level engineering designengineering-related courses in an engineeringa four (4) year EAC/ABET-accredited program accredited by the Engineering Accreditation Commission of the Accreditation Board of Engineering and Technology, or an equivalent engineering programone (1)shall be accepted as qualifying experience deemed equivalent by the board, may be approved.

(8)

Experience gained in engineering Research and design projects by faculty in an engineeringEAC/ABET-accredited program accredited by the Engineering Accreditation Commission of the Accreditation Board of Engineering and Technology, or an equivalent engineering program,one shall be accepted as qualifying experience if it meets the definition for "engineering," as defined by KRS 322.010(4)deemed equivalent by the board, may be approved.

(9)

TheExperience may be approved for execution or supervision of construction projects designed by a professional engineer shall be accepted as qualifying experience if the design meets the definition for "engineering," as defined by KRS 322.010(4).

(10)

The applicant shall demonstrate why any work experience not completedgained under the supervision of a professional engineer is qualifying experience applicable to licensureeligible for credit.

(11)

Qualifying experience shall be complete at the time of application for licensure.

(12)

Qualifying experience required by KRS 322.040(1)(a)2, 322.040(1)(b)2, and 322.040(2)(b) shall be gained following graduation from the engineering program required by the provisions of KRS 322.040(1)(a)1, 322.040(1)(b)1, and 322.040(2)(a) except that up to three (3) months of experience shall be accepted asmay be granted for qualifying experience earned while on active duty in the Armed Forces of the United States prior to graduating from the engineering program required by the provisions of KRS 322.040(1)(a)1, 322.040(1)(b), and 322.040(2)(a) if the experience meets the definition for "engineering," as defined by KRS 322.010(4).

Section 2.

Evaluation of Experience in Land Surveying Required under KRS 322.045 and 322.047. The board, in reviewing an application for licensure as a professional land surveyor pursuant to 201 KAR 18:020, shall consider the following:

(1)

Land surveying experience shall reflect increasing complexity of the land surveying tasks and the progressive responsibility of the applicant.

(2)

Experience shall include projects in which the applicant, while under the direct supervision of a practicing professional land surveyor, implemented work involving property conveyance and property boundary determination. The applicant shall also demonstrate experience in the fieldwork aspects of property boundary determination.

(3)

Construction surveying experience shall be limited to a maximum of one (1) year of qualifying experience credit.

(4)(3)

One (1) year of experience may be approved for Completion of a master's degree in land surveying from a board-approved program in land surveying from a college or university shall be accepted as one (1) year of qualifying experience.

(5)(4)

A maximum of two (2) years of qualifying experience under this section shall be approved for Land surveying experience gainedwork prior to completion of the education requirementsgraduation under KRS 322.045(1)(c)1, 2, 3, and 322.047(1)(a)1 and 2 shall be limited to a maximum of two (2) years of qualifying experience.

(6)(5)

Experience gained in violation ofthat violates KRS Chapter 322 shall not be accepted as qualifying experienceapproved.

(7)(6)

MilitaryLand surveying experience gained while on active duty in the Armed Forces of the United States shall be accepted as qualifying experience if it meets the definition for "land surveying," as defined by KRS 322.010(10)duringin the military serviceservicesin the Armed forces of the United States may be approved.

(8)(7)

A maximum of two (2) years of experience may be approved for Teaching land surveying courses at the postsecondary level shall be accepted as qualifying experience and shall be limited to a maximum of two (2) years of qualifying experience.

(9)(8)

Qualifying experience shall be complete at the time of application.

(10)(9)

A minimum of two (2) years of qualifying work experience shall be completed by the applicant after graduation from a program of four (4) years or more from a college or university and completion of the twenty-four (24) semester credit hour core curriculum. Claimed work experience considered qualifying pursuant to subsections (4) and (8) of this section shall not be considered qualifying work experience for the purposes of meeting this two (2) year post-graduation work experience requirementNotwithstanding subsections (3), (4), (5), and (8)(7), in no case shall An applicant's experience gained after graduation from a program of four (4) years or more, or completion of the twenty-four (24) semester credit hour core curriculum, whichever is later, be less than two (2) years.

Section 3.

Evaluation of OverlappingBoth Experience in Engineering Required under KRS 322.040 and in Land Surveying Required under KRS 322.045 and 322.047. shall consider the following: Overlapping experience in engineering and land surveying claimed on an application for licensure as a professional engineer or professional land surveyor pursuant to 201 KAR 18:020 shall be accepted as qualifying work experience towardmay receive a maximum of one (1) year credit that may count towards both engineering and land surveying experience requirements and shall be limited to a maximum of one (1) year of qualifying experience.

FILED WITH LRC: March 9, 2026
CONTACT PERSON: Kyle L. Elliott, Executive Director, Kentucky State Board of Licensure for Professional Engineers and Land Surveyors, 160 Democrat Drive Frankfort, Kentucky 40601, phone (502) 573-2680, fax (502) 573-6687, email kyle.elliott@ky.gov.

7-Year Expiration: 2/14/2027


Page Generated: 2/6/2026, 4:11:08 PM